Synology Camera License Hack

LINK >>> https://urlgoal.com/2tzgav

How to Hack Synology Camera License and Add More Cameras to Surveillance Station

If you have a Synology NAS device and want to use its Surveillance Station app to monitor your security cameras, you may have encountered a problem: the app only allows you to add a limited number of cameras for free, and you need to buy additional licenses to add more cameras. This can be expensive and inconvenient, especially if you have a lot of cameras or want to try different models.

Fortunately, there are some ways to hack Synology camera license and bypass the limit without paying for extra licenses. In this article, we will show you two methods that may work for you, depending on your Synology model and firmware version. However, please note that these methods are not officially supported by Synology and may violate their terms of service. Use them at your own risk and responsibility.

Method 1: Downgrade to DSM 6 and Use a Patched File

This method works for some older Synology models that can run DSM 6, such as DS220+. It involves downgrading your firmware from DSM 7 to DSM 6, and then replacing a system file with a patched version that removes the license check. Here are the steps:

Backup your data and settings before proceeding.

Download the DSM 6 firmware for your model from Synology's website.

Follow this guide to downgrade from DSM 7 to DSM 6.

Download the patched libssutils.so file from this YouTube video.

Use WinSCP or another SSH client to connect to your Synology NAS as admin.

Type "sudo su" and hit enter to get root access.

Navigate to /usr/syno/lib/libssutils.so and rename it to libssutils.so.bak.

Copy the patched libssutils.so file to /usr/syno/lib/ and change its permissions to 755.

Restart your NAS and enjoy unlimited cameras on Surveillance Station.

This method is based on this Reddit post.

Method 2: Use XPEnology Loader with DVA3221 or DVA1622 Profile

This method works for some newer Synology models that can run DSM 7, such as DS920+. It involves using XPEnology loader, which is a modified bootloader that allows you to install Synology firmware on non-Synology hardware. By using a DVA3221 or DVA1622 profile, you can get 8 camera licenses by default on Surveillance Station. Here are the steps:

Backup your data and settings before proceeding.

Download the XPEnology loader for DSM 7 from XPEnology forum.

Follow this guide to install DSM 7 on XPEnology.

Select DVA3221 or DVA1622 as your model when prompted by the loader.

Use a valid MAC address and serial number for your model. You can find them online or generate them with XPEnogen.

Finish the installation and enjoy 8 camera licenses on Surveillance Station.

This method is based on this XPEnology forum post.

Conclusion

In this article, we have shown you how to hack Synology camera license and add more cameras to Surveillance Station without paying for extra licenses. These methods 061ffe29dd