Condor Plume L1 Flash File MT6737M 7.0 Hang Logo Dead Fix Firmware
Download ->>> https://urluso.com/2tzi6b
How to Fix Condor Plume L1 Hang Logo and Dead Boot Issues with Flash File MT6737M 7.0 Firmware
If you are looking for a solution to fix your Condor Plume L1 smartphone that is stuck on the boot logo or dead after flashing, then you have come to the right place. In this article, we will show you how to download and install the flash file MT6737M 7.0 firmware for your Condor Plume L1 device and restore it to its normal working condition.
What is a Flash File and Why Do You Need It
A flash file is a software program that contains the operating system and other data of a smartphone. It is also known as firmware or stock ROM. Flashing a flash file means installing it on your device's memory using a computer and a USB cable.
There are many reasons why you may need to flash a flash file on your Condor Plume L1 smartphone. Some of them are:
Your device is stuck on the boot logo or boot loop and does not start normally.
Your device is dead or bricked after flashing a wrong or corrupted firmware.
Your device is infected by malware or viruses that affect its performance and security.
Your device has software issues such as bugs, errors, crashes, or lagging.
You want to upgrade or downgrade your device's firmware to a different version.
You want to unroot or remove custom recovery from your device.
You want to restore your device to its factory settings and remove all the user data.
How to Download and Install Flash File MT6737M 7.0 Firmware for Condor Plume L1
Before you proceed with the flashing process, you need to download and install some tools and drivers on your computer. These are:
The flash file MT6737M 7.0 firmware for Condor Plume L1. You can download it from here.
The SP Flash Tool. This is a software that allows you to flash the firmware on your device. You can download it from here.
The MTK USB Driver. This is a driver that enables your computer to recognize your device when connected via USB. You can download it from here.
A USB cable and a PC or laptop.
A backup of your personal data such as contacts, messages, photos, etc. Flashing will erase all the data on your device, so make sure you have a backup before proceeding.
A fully charged battery or at least 50% of battery life on your device.
Once you have downloaded and installed all the tools and drivers, follow these steps to flash the firmware on your Condor Plume L1:
Extract the flash file MT6737M 7.0 firmware zip file on your computer. You will get a folder with several files inside.
Run the SP Flash Tool as administrator on your computer.
Click on the \"Download\" tab and then click on the \"Choose\" button next to the \"Scatter-loading File\" option.
Browse and select the scatter file from the extracted firmware folder. It should be named as \"MT6737M_Android_scatter.txt\".
Make sure all the boxes are checked in the SP Flash Tool window.
Click on the \"Download\" button at the top of the SP Flash Tool window.
Turn off your Condor Plume L1 device and remove the battery if possible.
Connect your device to your computer via USB cable while holding the volume down button.
The SP Flash Tool will detect your device and start flashing the firmware automatically.
Wait for the flashing process to complete. It may take several minutes depending on the size of the firmware.
When the flashing is done, you will see a green tick mark 061ffe29dd