If you have a laptop that does not have enough USB ports or does not support USB 2.0, you may want to consider getting a Ake USB 2.0 Cardbus BC168. This is a type II Cardbus PC card that adds two or four high-speed USB 2.0 ports to your laptop, depending on the model. It supports data transfer rates up to 480 Mbps and works with Windows 98/2000/ME/XP and MacOSX operating systems. It also supports hot-plugging and wake-up features, and can connect up to 127 USB devices per port.
In this article, we will show you how to install and use the Ake USB 2.0 Cardbus BC168 on your laptop.
Installing the Ake USB 2.0 Cardbus BC168
Before you install the Ake USB 2.0 Cardbus BC168, make sure you have the following items:
A laptop with a free type II Cardbus PC card slot
An Ake USB 2.0 Cardbus BC168 (either dual or quad port)
A CD-ROM with the driver software (or download it from the internet)
An AC adapter (optional, but recommended for high-power devices)
Follow these steps to install the Ake USB 2.0 Cardbus BC168:
Turn off your laptop and insert the Ake USB 2.0 Cardbus BC168 into the Cardbus slot.
Turn on your laptop and wait for Windows to detect the new hardware.
Insert the CD-ROM with the driver software into your CD-ROM drive (or locate the downloaded driver file).
Follow the instructions on the screen to install the driver for your operating system.
Restart your laptop if prompted.
Connect your USB devices to the Ake USB 2.0 Cardbus BC168 ports and enjoy the high-speed data transfer.
Using the Ake USB 2.0 Cardbus BC168
Once you have installed the Ake USB 2.0 Cardbus BC168, you can use it as you would use any other USB port on your laptop. You can plug and unplug your USB devices without turning off your laptop, as long as they are self-powered or use an external power source. If you use bus-powered devices that draw more than 100 mA of current, you may need to use an AC adapter to provide enough power to the Ake USB 2.0 Cardbus BC168.
To eject the Ake USB 2.0 Cardbus BC168 from your laptop, follow these steps:
Disconnect all your USB devices from the Ake USB 2.0 Cardbus BC168 ports.
Click on the \"Safely Remove Hardware\" icon on the taskbar and select the Ake USB 2.0 Cardbus BC168 device.
Wait for a message that says it is safe to remove the device.
Gently pull out the Ake USB 2.0 Cardbus BC168 from the Cardbus slot.
The Ake USB 2.0 Cardbus BC168 is a handy device that can enhance your laptop's connectivity and performance by adding two or four high-speed USB 2.0 ports. It is easy to install and use, and supports a wide range of USB devices. It is also compatible with most operating systems and laptops that have a type II Cardbus PC card slot.
If you are looking for a reliable and affordable way to upgrade your laptop's USB capabilities, you may want to check out the Ake USB 2.0 Cardbus BC168. 061ffe29dd